Build a desk caddy.
A customizable 3D print by oddlyhelpful · Beta
A desk caddy,
divided your way.
A caddy for the desk in two parts. The shell's top slants down to the front, and its outside is smooth, ribbed or a lattice. The insert slides into it, split into as many compartments as you want, each sized your way. Both download as STLs, with a fit test to print first.
Beta. No caddy has been printed yet. Print the fit test first: two 8 mm rings that show whether the insert slides.
Build a desk caddy.
Replace every setting with the starting ones?
Loading the geometry kernel
The caddy
Reads
Cut 0.6 mm into the underside of the shell in letters 3 mm tall, as it reads with the caddy turned over, which is the view here. The line is centered, and goes onto a second line if it is too long for one. In the middle, the line goes above the mark and a second line below it; with no room there, the mark moves to a corner.
Saved in this browser. Saving a loaded design again bumps its version.
Details
The selected one is what the Print step uses. Configure one to keep working on it.
Nothing saved yet. Build your caddy, name it, and save.
Downloads
Print both parts standing on their floors, with no supports. Print the fit test first.